Spektrum AS3X Programmer

response required

I’ve now played w this phone app & the PC app for most of the day. One thing I never know is if either of these apps has actually written anything to the receiver; I see NO indicator that reading or writing is taking place from either app nor a way to force either. I haven’t found an instruction manual for the apps yet either. After using the PC app and setting up all my preferences; I wasn’t sure if they were ever written to the receiver; as far as I can see, there’s no function to cause a write or read to occur. Following that, I connected my phone to the receiver, it didn’t seem to discover/read anything from the receiver and when my transmitter was ON, there weren’t 3 flight modes as I had set up w the PC app. Looks like the PC app saved the info on the PC but never wrote it to the receiver. Seems like there’s some simple, essential things missing in the apps or I haven’t a clue what I’m doing!

response required

So i have a turbo timber bnf from a friend that modified the gains . I want to set them back to stock gain settings. This app has about 5 models in it under add new model . It does not have import model so i can get factory model settings from spektrum into this app . I also wanted to know which flight mode was safe mode and tech did not know . Everything im reading suggests i get a windows computer that I don’t have to install factory programming that came in my turbo timber . So what is this app really for other than changing gains ? It needs all the factory setups for all horizon bnf planes in my opinion instead of the 5 that comes in this app . Just my opinion though

I bought an 7350 AS3X rx to replace an ar8010t. I also bought the Bluetooth dongle to connect to my iPhone 6plus. Following the procedures described in the videos I plug the dongle in to rx, connect the rx battery/flight pack and then open the app. While the Bluetooth dongle is still blinking, tap the Bluetooth icon in the top left corner of app and select the rx. Connects in seconds. Layout of the app is nice and easy to navigate. The only issue is the control surface graphics do not line up properly with the image of the plane on my iPhone but it’s easy to understand which are the ailerons, flaps, elevator etc. Setting the rx up was fairly quick. I reversed elevator servo in the app, and the flap servo in the transmitter. Also set flap/elevator mix in transmitter as well as dual rates and expo. This is applicable for the 7350 and 9350 as3x. I have heard that if using the 636 rx the dr and expo should be done in app/rx. So far I’m very pleased with how easy the app let me adjust the 7350.

This app is well laid out and does the job. I am flying two planes using this on a iPhone 6S running iOS 10.3.3 an AR636 receiver and a DX6i transmitter. I especially like the "heading hold" feature for hand launching, but was disappointed there is no "safe" switch option available. The only annoyance is that the trim buttons on the radio do nothing. Maybe this is unique to the 6i. Thus trim is made through the surface set up or mechanically.

I have two AR636 and two AR6335 AS3X receivers. Have been using this app to program/set up/tweak these four receivers without any problems well I should never say never but you get the point. This app had worked /is working on my iphone 4, 5, 6 and 6 plus. You must set the volume to max in order for the app to work properly.