MID WiFi (Free)

Evaluation version of MID WiFi and Marine Instrument Display. Marine Instrument Display WiFi allows you to create/follow/transfer routes, track your path, control autopilot, receive/store/forward NMEA0183 data over WiFi and see AIS targets on the map. Send/receive data through iCloud (e.g. remote anchor alarm). MID WiFi also features the world's first autopilot controller app for Apple Watch. Search "Marine Instrument Display" for Lite version. FEATURES - Compass Heading (mag/true) (HDG) - Clock (utc/local) (CLK) * Course Over Ground (COG) * Speed Over Ground (SOG) * Average SOG (ASOG) * Maximum SOG (MSOG) * Trip Distance (TRIP) * Trip Time (TIME) * Countdown Timer (CDT) * Distance to Line (DTL) * Time to Line (TTL) * Barometric Pressure (BPR) (NMEA or iPhone6->) * Bearing to Waypoint (BTW) * Distance to Waypoint (DTW) * Time to Waypoint (TTG) * Cross Track Error (XTE) * Velocity Made Good to Waypoint (VMGwpt) * Heeling (HLG) * Position ** Apparent Wind Angle and Speed (AWA, AWS) ** True Wind Angle and Speed (TWA, TWS) ** Maximum Apparent/True Wind Speed (MAWS, MTWS) ** True Wind Direction (TWD) ** Velocity Made Good to Wind (VMGwnd) ** Boat Speed (SPD) ** Maximum Boat Speed (MSPD) ** Depth (DPT) ** Air and Sea Temperatures (AIR, SEA) ** Predicted Boat Speed (PSPD) ** Boat Speed to Predicted Boat Speed Ratio (SPR) ** Revolutions Per Minute (Engine/Shaft) (RPM) ** Propeller Pitch (PRP) ** NoLand Eng. Analog Values (EAV1-5) ** TackTick FFP1-4 ** Rate of Turn (ROT) ** Fluid Levels (TANKS) * = Internal GPS or NMEA-WiFi bridge required ** = NMEA-WiFi bridge required (e.g. Vesper Marine XB-8000 and WatchMate Vision, Simrad GoFree WIFI-1, RS232-WiFi, Digital Yacht iAIS/WLN10, ShipModul MiniPlex-2/3Wi, PilotsTech PilotPlug, iMux, Ockam LANbridge) WIND VIEW - Shows Apparent and True Wind Angles simultaneously - Size of the blue sector indicates the variation in wind direction - Red dot shows the BTW MAP VIEW - AIS targets (** - Create and follow routes - Transfer routes on NMEA - Create and replay tracks - Autopilot control (Raymarine, requires MiniPlex-3Wi) - Share tracks and data by email (GPX, NMEA) - Access stored NMEA data via iTunes File Sharing ALARMS - Depth (Deep, Shallow) - Anchor (Deep, Shallow, Distance) - Wind (AWA/TWA/AWS/TWS High/Low, TWD Shift) HOW TO USE - Tap the SET to enter the Settings page - Tap the value of any field to cycle through the color modes - Tap/swipe the title of any field (such as TIME) to select the data to the field - Tap a unit to cycle through the unit modes - Tap the unit (°) of the heeling (HLG) to calibrate (zero angle) - Press the value of any field at least two seconds to reset the TIME, ASOG, MSOG and TRIP - Rename a route or a track by tapping the name of it - Use IP address 255.255.255.255 for the UDP broadcast/multicast. The port for the Simrad GoFree discovery is 2050 or 2052, 5000-5010 are for Ockam LANbridge and 55554 for SailTimer Wind Vane. - Use 127.0.0.1 and port 55554 SailTimer Wind Instrument - NMEA0183 data can be forwarded as UDP multicast to other devices - The trip time runs while moving (SOG > 0) - The COG is shown while moving (SOG > 0) COUNTDOWN TIMER - Configure the start time (1 - 30 minutes) by touching the SET to enter the Settings view - Start/sync the timer by touching the "sync" - Stop the timer by touching the "sync" at least two seconds - The timer beeps every minute and when 50, 40, 30, 20, 10, 5, 4, 3, 2, 1, 0 second(s) are remaining CALIBRATION 1. The back cover must be faced forward accurately in order to get the correct compass heading. 2. Mount the iPhone/iPad securely and make sure it cannot move accidentally to ANY direction. 3. Tap the unit field (°) of the heeling (HLG). HLG is set to zero and the heading shows the correct value. Continued use of GPS running in the background can dramatically decrease battery life.