IVTAnywhere

About version 3.6.0: - To receive push notification in case of an error, you have to allow it under Setting screen – Push Notification. You will get push notification also if app IVT Anywhere is closed. - System pressure will be displayed at Info screen under System info for Ems 2 appliances with a pressure sensor. You would like to remotely control and monitor your heating system via the Internet? That is now possible with the IVT "IVT Anywhere" app. You can perform the following operating and monitoring functions: - change the set room temperature in 0.5-degree increments - switch simply and quickly between the heating program, reduced heating mode and constant heating mode - Simply change the hot water temperature - conveniently change the switching times of your heating program - display the historical temperatures – for the current day or week. IVT Anywhere offers you pioneering mobile heating convenience that you can use just as advantageously for your home as for your holiday flat. Operation is completely similar to the heating controls you are used to and, thanks to the intuitive menu, especially simple. The password-protected access ensures a high degree of security. Technical requirements: To use the full version of the IVT Anywhere app, you need: - gateway for communication between the network and heating control unit - IOS - from Version 4.3 - an existing LAN network (router with a free RJ45 connection) Note: There may be additional costs for the Internet connection; an Internet flat rate is recommended. Your IVT heating representative will be happy to advise you and tell you whether your heating system fulfils the technical requirements. The company also supplies and installs the Gateway. In addition, you will receive personal consultation and assistance in using the system. Related to the gateway: !! Notice: Fault caused by Interferences. CAN cable must be a screened twisted cable. !! UPOZORNĚNÍ: Chyba může být způsobena interferencí. CANbusový kabel musí být stíněný a kroucený. !! Notice: Do not confuse 12V and CAN connection! If 12 V is connected to the CAN, the processors will be destroyed. - Check that the three wires are connected to the terminals with the corresponding markings on the PCB. !! UPOZORNĚNÍ: Nezaměňte přípojky pro 12 V a pro sběrnici CAN! Pokud byste připojili 12 V na sběrnici CAN, došlo by ke zničení procesorů.Zkontrolujte, že tři vodiče jsou připojeny na svorky korespondující s označením na PCB. In-app purchase NOTE! If you don't have a Swedish electricity contract, don't buy this function. – Payment will be charged to iTunes Account at confirmation of purchase. – Subscription automatically renews unless auto-renew is turned off at least 24-hours before the end of the current period. – Account will be charged for renewal within 24-hours prior to the end of the current period, cost of renewal is the same as for the initial purchase. – Subscriptions may be managed by the user and auto-renewal may be turned off by going to the user's Account Settings after purchase. Terms of Use: https://www.bosch-climate.us/termsofuse/ Privacy Policy: https://www.bosch-thermotechnology.com/corporate/en/privacy.html