inCarDoc OBD2 ELM327 Scanner

- Your connected car with inCarDoc OBD2 Scanner - Check Engine, car diagnostics, scanning, monitoring, and logbook tool: reads real-time and stored diagnostics parameters from ECU of OBD2 compliant cars. Note!!! Requires ELM327 or compatible OBD2 adapter. Supported: OBD2 (WiFi, Kiwi 3 (BLE), iCar 3 (BLE). Read more at site http://incardoc.com Car diagnostics: inCarDoc OBD2 | ELM327 Scanner works as fault code scanner: read Check Engine (MIL) state, details, related freeze frame data, find descriptions, and clean stored diagnostic trouble codes (DTC). Store and share diagnostics data when looking for a professional service/repair assistance. Please note that the app supports only parameters and ECU's specified with OBD2 standard, which is Engine and Emission systems. Real-time parameters: Reads real-time engine and vehicle OBD2 parameters from car’s sensors: speed, rotation (rpm), coolant temperature, pressure, lambda, and multiple other sensors data supported by your car. Supported chart drawing and analog/digital widgets presentation. Please note that the exact list of exposed parameters depends on your car make/model/year. Economizer: Special mode for presenting and tracking the car’s fuel economy/consumption. Allows presenting both in-drive (instant and average MPG) as well as per trip, per day, and other statistics. Please note, that feature available when appropriate economy parameters (MAF or MAP+IAT+RPM) supported in your car. For correct calculation, you may need to enter proper Engine displacement (in cubic cm) and volumetric efficiency (in %, the default is 80). Other features: • logbook notes: fueling, service records, car maintenance, diagnostics • GPS parameters: speed, altitude • register and upload data to web • console mode: for advanced users, direct OBD2 and ELM327 commands sending • use custom configurations for non-standard parameters and protocols - More features with inCarDoc PRO - inCarDoc OBD2 | ELM327 Scanner PRO version is now available in-app purchases. inCarDoc PRO features: - allows real-time parameters recording - read, display, read multiple parameters simultaneously - recording parameters in background mode (for Kiwi3, Vgate, Bluetooth low energy adapters) - view and send recorded parameters traces - GPS support - Upload recorded data to server www.incardoc.com (beta version) - fuel economy statistic screen Note!!! Avoid simultaneous running of multiple OBD reading applications, be sure that other applications are not keeping live OBD connection. Configure inCarDoc OBD2 application: 1. Connect the OBD-II Wi-Fi cable to the OBD-II connector of your car (usually it is under the steering wheel). Start the car engine and wait for the green light on the Wi-Fi device. 2. On your iPhone device, go to Settings, select connect to a Wi-Fi network. After connecting to Wi-Fi, go to advanced settings: Set IP Address: Static. IP Address: 192.168.0.11 Subnet Mask: 255.255.255.0 Choose a device name for Wi-Fi Exit settings. 3. Go to the inCarDoc application> Settings, where configure the following: IP Address: 192.168.0.10 Port: 35000 Click “Save” 4. Start the engine. View vehicle parameters. You could help to improve the project by sending OBD2 details info related to your car. Fill in the car details with the configuration screen and click the send button in "General information" section. We also recommend a short video to learn how to set up the application - https://www.youtube.com/watch?v=wJ47kOvxL2Y Please send your questions with email. You are always welcome! http://incardoc.com Thank You!