Battery and charger test

Suddenly stop registering a charge, when the two other chargers indicated charging voltage and current!🤷🏽‍♂️ Pict of Charger; this my last review I am persuaded by the Lord Jesus and His Holy Spirit that I was I who was in error, and since I must admit that so far this is the best Charger I’ve ever run into, and the best one I’ve downloaded 1st Class so far, I love how you not only DO know the Voltage and current it’s being charged with, the condition of your cell phone battery, and the quick visual aid of the obvious whether your phone charger is plugged in a power source or not, a lot more, but already almost too much in order to beat our End of Work day❗️Best observation is this is the best, most adequate Charger, if there’s anything I missed, feel free to contact me, All Hackers will be subject to absolute discredit, anger😤😠😡🤯Please everyone be mature and above the board operations or we’ll bring you down❗️🚨😎with our best Agents❗️ All in all you can’t go wrong with this app.❗️Good Luck, and give this one a try🤷🏽‍♂️See if you don’t think the same as I do! Back to my desk and to work at home with other apps. to assist❗️👉🏽👍🏽 Five ⭐️ ⭐️ ⭐️ ⭐️ ⭐️ since if I had any previous problems, they’re either my mistake to be honest and if not, they’ve been fixed, always double check before you give anyone bad Marks against them or their software be fair❗️👍🏽❣️

response required

The data about voltage and current are not correct and can’t be counted on. For example the numbers of voltage and current at the starting point (2% of battery charge) which just you have connected your charger to your iPhone, are the same as finishing period of charging (100%) using the original charger. As far as we know, at the start of charging period, iPhone goes to rapid speed charging (with lowest voltage of the battery and high current of charger), and at the end of the procedure, goes to trickle charging mode (battery voltage has been increased and current is at the lowest level). The only data which may be correct is the temperature of the battery.

response required

This App doesn’t read accurately on my iPhone. It always shows the same current when charging. Jumps around between 1000 mA and 1400 mA up to 100 percent charge when I know for a fact that the phone is not taking that much power. The charging current drops off as the battery nears 100 percent and the app does not reflect that which makes me think the current values are bogus. Also it reads 3.6 volts all the time for the battery which is also not accurate. In reality the battery voltage goes up to 4.2 above about 85 percent charge.

I like this app. It seems to work as advertised. Only two changes I would like to see. First is the ability to view temperature in farenheit. The other is to make the app have a quiet mode. Other than those two suggestions, the app works great.

It tells me everything I need to know and it has actually made my phone charge faster I was making craft I set a timer for five minutes and my phone was at 2 percent when the timer went of it was at 48